D000	Sprite O X Pos
D001	Sprite O Y Pos
D002	Sprite 1 X Pos
D003	Sprite 1 Y Pos
D004	Sprite 2 X Pos
D005	Sprite 2 Y Pos
D006	Sprite 3 X Pos
D007	Sprite 3 Y Pos
D008	Sprite 4 X Pos
D009	Sprite 4 Y Pos
D00A	Sprite 5 X Pos
D00B	Sprite 5 Y Pos
D00C	Sprite 6 X Pos
D00D	Sprite 6 Y Pos
D00E	Sprite 7 X Pos
D00F	Sprite 7 Y Pos
D010	Sprites 0-7 X Pos (msb of X coord.)
D011	VIC Control Register 7   Raster Compare: (Bit 8) 6   Extended Color Text Mode 1 = Enable 5   Bit Map Mode. 1 = Enable 4   Blank Screen to Border Color: O = Blank 3   Select 24/25 Row Text Display: 1 = 25 Rows 2   Smooth Scroll to Y Dot-Position (0-7) 1   Smooth Scroll to Y Dot-Position (0-7) 0   Smooth Scroll to Y Dot-Position (0-7)
D012	Read Raster / Write Raster Value for Compare IRQ
D013	Light-Pen Latch X Pos
D014	Light-Pen Latch Y Pos
D015	Sprite display Enable: 1 = Enable
D016	VIC Control Register 7   Unused 6   Unused 5   Always set this bit to 0 !!! 4   Multi-Color Mode: 1 = Enable (Text or Bit-Map) 3   Select 38/40 Column Text Display: 1 = 40 Cols 2   Smooth Scroll to X Pos 1   Smooth Scroll to X Pos 0   Smooth Scroll to X Pos
D017	Sprites O-7 Expand 2x Vertical (Y)
D018	VIC Memory Control Register 7-4   Video Matrix Base Address (inside VIC) 3-1   Character Dot-Data Base Address (inside VIC) 0     Select upper/lower Character Set
D019	VIC Interrupt Flag Register (Bit = 1: IRQ Occurred) 7   Set on Any Enabled VIC IRQ Condition 3   Light-Pen Triggered IRQ Flag 2   Sprite to Sprite Collision IRQ Flag 1   Sprite to Background Collision IRQ Flag 0   Raster Compare IRQ Flag
D01A	IRQ Mask Register: 1 = Interrupt Enabled
D01B	Sprite to Background Display Priority: 1 = Sprite
D01C	Sprites O-7 Multi-Color Mode Select: 1 = M.C.M.
D01D	Sprites 0-7 Expand 2x Horizontal (X)
D01E	Sprite to Sprite Collision Detect
D01F	Sprite to Background Collision Detect
D020	Border Color
D021	Background Color O
D022	Background Color 1
D023	Background Color 2
D024	Background Color 3
D025	Sprite Multi-Color Register 0
D026	Sprite Multi-Color Register 1
D027	Sprite O Color
D028	Sprite 1 Color
D029	Sprite 2 Color
D02A	Sprite 3 Color
D02B	Sprite 4 Color
D02C	Sprite 5 Color
D02D	Sprite 6 Color
D02E	Sprite 7 Color

 
Der MOS 6567 ist für die NTSC und der pin-kompatible MOS 6569 für PAL zuständig.

 

Pin 1-7 D6-D0   I/O   Datenbus Pin 8 !IRQ O Interrupt ReQuest Pin 9 LP I LightPen Pin 10 !CS I Chip Select: Bei HIGH wird der VIC vom Bus getrennt Pin 11 R/!W I Read/!Write: LOW=Register schreiben, HIGH=lesen Pin 12 BA O ReaDY: Bei LOW wartet die CPU auf HIGH Pin 13 Vdd – Reference voltage: +12V DC Pin 14 Color O Color output Pin 15 S/Lum   O Sync/Lumimance output Pin 16 AEC O Address Enable Control Pin 17 ø 0 O system clock output Pin 18 !RAS O Row Address Strobe Pin 19 !CAS O Cow Address Strobe Pin 20 GND – Ground: Masse (0 V) Pin 21 ø color I Color Clock: NTSC: 14.31818 MHz,PAL: 17.734472 MHz Pin 22 ø in I DOT CLOCK: NTSC: 8.18 MHz,PAL: 7.88 MHz Pin 23 A11 I/O Adressbus Bit 11 Pin 24-29 A0-A5/A8-A13   I/O Multiplexed video Address bus Pin 30-34 A6-A10 I/O Adressbus: Bit 6-10 Pin 35-38   D11-D8 I/O Farb-Ram Datenbus Pin 39 D7 I/O Datenbus: Bit 7 Pin 40 Vcc – Secondary voltage: +5V DC

Weiterführende Dokumente